2.5.4 APM Confi gurati on

APM Configuration

 

Power Button Mode

[On/Off]

Restore on AC Power Loss

[Power Off]

Power On By PCI Device

[Disabled]

Power On By

Ring

[Disabled]

Power On By

PS/2 KB/MS

[Disabled]

Power On By

RTC Alarm

[Disabled]

Power Button Mode [ On/Off]

Allows the system to go into On/Off mode or suspend mode when the power button is pressed.

Configuration options: [Power Off] [Power On]

Restore on AC Power Loss [ Power Off]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. Configuration options: [Power Off] [Power On]

Power On By PCI Devi ces [ Di sabl ed]

When set to [Enabled], this parameter allows you to turn on the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

Power On By Ri ng [ Di sabl ed]

Enable or disable RI to generate a wake event.

Configuration options: [Disabled] [Enabled]

Power On By PS/2 KB/MS [ Di sabl ed]

Enable or disable PS/2 Keyboard/Mouse to generate a wake event. Configuration options: [Disabled] [Enabled]

Power On By RTC Al arm [ Di sabl ed]

Allows you to enable or disable RTC to generate a wake event. When this item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear with set values. Configuration options: [Disabled] [Enabled]

2-30

Chapter 2: BIOS setup