A new set of navigation keys is displayed on the bottom of the screen.
2.Press <R> to rebuild a RAID array. The following screen appears.
|
|
| Array 1 : NVIDIA MIRROR | XXX.XXG |
|
| ||
|
|
| - Select Disk Inside Array - |
|
| |||
| RAID Mode: Mirroring |
|
|
|
|
| ||
| Striping Width: | 1 |
| Striping Block: 64K |
|
| ||
| Adapt | Channel | M/S | Index | Disk Model Name | Capacity | ||
|
|
|
|
|
|
|
| |
| 2 | 1 | Master | 0 | XXXXXXXXXXXXXXXXX | XXX.XXGB |
| |
| 1 | 0 | Master | 1 | XXXXXXXXXXXXXXXXX | XXX.XXGB |
| |
|
|
| [↑↓] Select [F6] Back | [F7] Finish |
|
| ||
|
|
|
|
|
|
|
|
|
3.Use the up or down arrow keys to select a RAID array to rebuild, then press
<F7>. The following confirmation message appears.
Rebuild array?
[ENTER] OK [ESC] Cancel
4.Press <Enter> to start rebuilding array or press <Esc> to cancel.
5.After the rebuild process, the Array list menu appears.
ASUS M2N / M2N DH |