Asus M2N, M2N DH 4.4.3Chipset, Memory Controller, Memory Configuration

4.4.3Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Memory Controller

Options for NB.

SouthBridge Configuration

Hyper Transport Configuration

Memory Controller

The Memory Conotroller menu allows you to change the Northbridge settings.

Memory Controller
	Memory Configuration
	Power Down Control	[Auto]
Memory CLK		: 200 MHz
CAS Latency (Tcl)		: 3.0
RAS/CAS Delay (Trcd)		: 3 CLK
Min Active RAS (Tras)		: 8 CLK
Row Precharge Time (Trp)		: 3 CLK
RAS/RAS Delay (Trrd)		: 2 CLK
Row Cycle (Trc)		: 11 CLK
Row Refresh Cycle (Trfc)		: 14 CLK		Select Screen
Read Write Delay (Trwt)		: 4 CLK
				Select Item
Read Preamble		: 5.5 ns
			+-	Change Option
Asynchronous Latency		: 7 ns
			F1	General Help
			F10	Save and Exit
			ESC	Exit

Memory Configuration

The memory configuration menu allows you to change the memory settings.

Memory Configuration
Memclock Mode	[Auto]
MCT Timing Mode	[Auto]
Bank Interleaving	[Auto]
Enable Clock to All DIMMs	[Disabled]
MemClk Tristate C3/ATLVID	[Disabled]
Memory Hole Remapping	[Enabled]

MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.

Memclock Mode [Auto]

Sets the memory clock mode. Configuration options: [Auto] [Limit] [Manal]

4-22 Chapter 4: BIOS setup