Asus M2NPV-MX manual Installing a Dimm, Removing a Dimm, Is properly seated

1.7.3Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.

		2
1. Unlock a DIMM socket by	3	DDR2 DIMM notch

pressing the retaining clips outward.

1

2.Align a DIMM on the socket such that the notch on the DIMM

matches the break on the

socket.1

3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM

is properly seated. Unlocked retaining clip

•A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.

•The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR DIMMs to the DDR2 DIMM sockets.

1.7.4Removing a DIMM

To remove a DIMM:

1.Simultaneously press the retaining clips outward to unlock the DIMM.

1

2

1

DDR2 DIMM notch

Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.

2.Remove the DIMM from the socket.

ASUS M2NPV-MX 1 - 17