6.1.3Installing two CrossFireX™ graphics cards

The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.

1.Prepare two CrossFireX-ready graphics cards.

2.Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.

3.Ensure that the cards are properly seated on the slots.

4.Align and firmly insert the CrossFireX bridge connector to the goldfingers on each graphics card. Ensure that the connector is firmly in place.

6 Chapter

CrossFireX bridge (bundled with graphics cards)

5.Connect two independent auxiliary power sources from the power supply to the two graphics cards separately.

6.Connect a VGA or a DVI cable to the graphics card.

Goldfingers

6-2

Chapter 6: Multiple GPU support