10.U�SB 2.0 connectors (10-1 pin U�SB910, U�SB1112, U�SB1314)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480Mbps connection speed.

USB1314

USB1112

 

USB910

 

USB+5V USB P14- USB P14+

GND NC

 

USB+5V USB P12- USB P12+

GND NC

 

USB+5V USB P10- USB P10+ GND NC

M5A97 R2.0

 

 

 

 

 

 

 

PIN 1

USB+5V USB P13- USB P13+

GND

PIN 1

USB+5V USB P11- USB P11+

GND

PIN 1

USB+5V USB P9- USB P9+ GND

 

 

 

M5A97 R2.0 USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

11.DRCT header (2-pin DRCT)

This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard.

M5A97 R2.0

M5A97 R2.0 DRCT header

Ensure that your chassis comes with the button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details.

Chapter 1

M5A97 R2.0

1-27