SB HD Azalia Configuration
Allows you to change the HD Azalia configuration.
[Enabled] | Enables the High Definition Audio Azalia device. |
[Disabled] | Disables the device. |
| The following two items appear only when you set the HD Audio Azalia Device item to |
| [Enabled]. |
Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97
or | |
module supports. | |
[HD] | Sets the front panel audio connector (AAFP) mode to high definition |
| audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97 |
SPDIF Out Type [SPDIF] | |
[SPDIF] | Sets to [SPDIF] for SPDIF audio output. |
[HDMI] | Sets to [HDMI] for HDMI audio output. |
3.5.8APM
ErP Ready [Enabled]
Allows the BIOS to switch off some power at S5 to get the system ready for ErP requirement. When this item is set to [Enabled], all other PME options will be switched off. Configuration options: [Enabled] [Disabled]
The following items appear only when you set the ErP Ready to [Disabled].
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Device [Disabled]
Allows you to use PS/2 device to turn on the system. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PME [Disabled]
[Disabled] | Disables the PME to wake up by PCI/PCIE devices. |
[Enabled] | Allows you to turn on the system through a PCI/PCIE LAN or modem card. |
| This feature requires an ATX power supply that provides at least 1A on the |
| +5VSB lead. |
Chapter 3
ASUS M5A97 R2.0 |