3 Chapter
HW Fast Boot [Disabled]
Allows the system to enable or disable the HW Fast Boot.
Configuration options: [Disabled] [Enabled]
DirectKey Enable [Go to BIOS...]
[Disabled] | Disables the DirectKey button. The system will only power on or |
| off when you press the DirectKey button. |
[Go to BIOS Setup] | Allows the system to power on and go to the BIOS Setup directly |
| when you press the DirectKey button. |
Boot Logo Display [Auto]
[Auto] | Auto adjustments for Windows requirements. |
[Full Screen] | Maximize the boot logo size. |
[Disabled] | Hid the logo during POST. |
The following items appears only when you set the Boot Logo Display item to [Disabled].
Post Report [5 sec]
This item allows you to select the desired Post Report waiting time. The values range from 0 to 10 seconds or until the <Esc> button is pressed.
The following items appears only when you set the Boot Logo Display item to [Auto] or [Full Screen].
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.
This feature will only work when set under normal boot.
Bootup NumLock State [On]
[On] | Set the |
[Off] | Set the |
Wait For ‘F1’ If Error [Enabled]
[Disabled] | Disables the function. |
[Enabled] | The system waits for the <F1> key to be pressed when error occurs. |
Chapter 3: BIOS setup |