3.HARDWARE SETUP

11)VGA Header (16-pin VGA)

The VGA Header lets you use the onboard AGP VGA and connect a standard (CRT) monitor through the provided VGA cable with mounting bracket. Con- nect the cable to this header and mount the bracket to the case on a free expansionslot. NOTE: You can make available the monitor port by setting the SW2-5 switch (DSW2) to ON.

H/W .3

ME-99B

®

ME-99B VGA Header

16

15

Orient the red stripe on the

monitor cable with pin 1

 

 

2

1

 

Bracket to end approximately 6inch

TIP: You may also remove the bracket connector and mount them directly to the case to save expansion slot space.

SETUP

Connectors

12)LCD Header (20-pin LCDHD)

This header supports the provided LCD cable with mounting bracket. Connect the cable to this header and mount the bracket to the case on a free expansion slot. You can make available the LCD port by setting the SW2-7 switch (DSW2) to ON. NOTE: This connector is available only on motherboards with optional Digital Flat Panel (DFP) interface support.

 

LCDHD

 

11

20

 

1

10

 

1: FDDCCLK

11: FDDCDAT

 

2: PLSENSE

12: 0+5V

ME-99B

3: GND

13: TXC-

4: TXC+

14: GND

 

 

5: TX0-

15: TX0+

 

6: GND

16: TX1-

®

7: TX1+

17: GND

 

8: TX2-

18: TX2+

ME-99B LCD Header

9: GND

19: (No connection)

10: (No connection)

20: (No connection)

32

ASUS ME-99B User’s Manual