Asus ME-99B ASUS ME-99BUser’s Manual, 24)Reset Switch Lead (2-pinRESET), 25)AT Power Supply Connector (12-pinPS2PWR), 23)ATX Power Switch / Soft-OffSwitch (2-pinPWRSW)

3.HARDWARE SETUP

23)ATX Power Switch / Soft-Off Switch (2-pin PWRSW)

The system power is controlled by a momentary switch connected to this lead. Pressing the button once will switch the system between ON and SOFT OFF. Pushing the switch while in the ON mode for more than 4 seconds will turn the system off. The system power LED shows the status of the system’s power.

24)Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting to prolong the life of the system’s power supply.

25)AT Power Supply Connector (12-pin PS2PWR)

This connector connects to a standard 5 Volt power suppl˝¡ To connect the leads from the power supply, ensure first that the power supply is not plugged. Most power supplies provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient the connectors so that the black wires are together.

			RED
		+5V	RED
			RED	P9
		-5V
			WHT
			BLK
		GND	BLK
			BLK
			BLK
		-12V	BLU	P8
		+12V	YLW
			RED
		+5V
			ORG
	ME-99B	PG
®		Power Connector	Power Plugs from
		on Motherboard	Power Supply

ME-99B AT Power Connector

Using a slight angle, align the plastic guide pins on the lead to their receptacles on the connector. Once aligned, press the lead onto the connector until the lead locks into place.

H/W SETUP	Connectors
3.

ASUS ME-99B User’s Manual 37