![](/images/new-backgrounds/1156839/15683933x1.webp)
3.3Troubleshooting (FAQ)
Problem |
| Possible Solution | ||
|
|
|
|
|
Power LED is not ON | • | Press the | button to check if the monitor | |
| • | is in the ON mode. | ||
| Check if the power cord is properly | |||
|
| connected to the monitor and the power | ||
|
| outlet. |
|
|
The power LED is blinking and there is no | • | Check if the monitor and the computer are |
| |
screen image | • | in the ON mode. | ||
| Make sure the signal cable is properly | |||
| • | connected the monitor and the computer. | ||
| Inspect the signal cable and make sure | |||
| • | none of the pins are bent. | ||
| Connect the computer with another | |||
|
| available monitor to check if the computer | ||
|
| is properly working. | ||
Screen image is too light or dark | • Adjust the Contrast and Brightness settings |
| ||
|
| via OSD. |
|
|
Screen image is not centered or sized | • | Press the A | button for |
|
properly |
| automatically adjust the image(For VGA | ||
| • | mode only). |
|
|
| Adjust the | |||
|
| via OSD(For VGA mode only). | ||
Screen image bounces or a wave pattern is | • | Make sure the signal cable is properly |
| |
present in the image | • | connected to the monitor and the computer. | ||
| Move electrical devices that may cause | |||
|
| electrical interference. | ||
Screen image has color defects (white does | • | Inspect the signal cable and make sure that |
| |
not look white) |
| none of the pins are bent. | ||
| • Perform "All | Reset" via OSD. | ||
| • | Adjust the R/G/B color settings or select the | ||
|
| Color Temperature via OSD. | ||
Screen image is blurry or fuzzy | • | Press the A | button for |
|
|
| automatically adjust the image(For VGA | ||
| • | mode only). |
|
|
| Adjust the | |||
|
| via OSD(For VGA mode only). | ||
|
|
|
|
|