2.2.3CPU heatsink weight support

For additional protection from motherboard breakage due to the weight of the CPU heatsinks, your motherboard package comes with two solution kits:

•X-PAD accessory kit containing:

-2 x metal support plates

-1 x contour sheet

-3 different sets of metal nuts and rubber pads for varied chassis standoffs (each set contains 8 metal nuts and 2 rubber pads)

•2 x CEK spring

You can use any of the two solutions to protect the motherboard.

Using the X-PAD accessory kit

To install the support plates:

1.Open and lay your system chassis flat on a stable surface, then place the motherboard standoffs on the holes as shown.

Standoff

2.Align the holes of the contour sheet with the standoffs on the base of the chassis. Press the sheet flat making sure that it is completely affixed to the chassis.

3.Determine the height of the standoffs on your chassis, and select the appropriate set of metal nuts and rubber pads from your package.

Use a nut size that is slightly lower than the standoffs on your chassis.

ASUS NCLV-D Series

2 - 3