7 . USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

NCLV(Series) USB 2.0 connector

NC

GND

USB_P6+

USB_P6-

USB+5V

USB34

USB+5V

USB_P5+

USB_P5-

USB+5V

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

8 . Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

COM2

PIN 1

NCLV(Series)

Serial port2 (COM2) connector

ASUS NCLV-D Series

2 - 35