III. INSTALLATION

Jumper Settings

1.Flash ROM Boot Block Programming (JP6)

This sets the operation mode of the boot block area of the BIOS Flash ROM to allow programming in the Enabled position.

Programming JP6

 

Disabled

[1-2]

(Default)

Enabled

[2-3]

 

JP6JP6

1

 

 

1

 

 

2

 

 

2

 

 

3

 

 

3

 

 

Disabled / Protected

Enabled

(Default)

 

 

 

Boot Block Programming (Disable / Enable)

2.Clear CMOS Data / Battery Test Jumper (JP5A)

The CMOS RAM is powered by the onboard button cell battery. You can test the battery’s current by removing this jumper and attaching a current meter to each pin. WARNING: You must unplug the power cord to your power supply to ensure that there is no power to your motherboard. The CMOS RAM containing BIOS setup information will be cleared by this action. You must enter BIOS to “Load Setup Defaults” and re-enter any user infor- mation after removing and reapplying this jumper.

INSTALLATION

(Jumpers)

III.

 

 

 

JP5A

JP5A

 

 

 

Clear CMOS Data /

Operation

(Default)

Battery Test Mode

Clear CMOS Data / Battery Test Jumper

ASUS P/I-AP55TV User’s Manual

7