INSTALLATION .III (Connectors)
III.INSTALLATION
5.ATX Power Supply Connector
This connector connects to a ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT: Make sure that the ATX power supply can take at least 10mAmp load on the 5Volt standby lead (5VSB). You may experience difficulty in powering on your system without this.
5.0V | 5.0V | GND | GND | GND | GND | 3.3V | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12.0V | 5VSB | GND | 5.0V | GND 5.0V | GND | 3.3V | 3.3V | |||||||||||
ATX Power Connector on Motherboard
20 | ASUS |