III. INSTALLATION

Attach Mount Bridges

Four screws should be showing next to each corner of the SEC CPU Slot with the two attach mount bridges installed.

SEC CPU slot

NOTE: Encircled items are the screws from the mount bridges (1 & 2)

Attach Mount Bridges (underside)

Installing the Pentium II Processor

1.Mount the Pentium II Retention Mechanism: The retention mechanism is designed to fit into the SEC slot only one way.

TIP: Orient the mechanism’s lock holes toward the motherboard’s chipset (see moth- erboard layout for the location of the AGPset).

Be sure to align the notch in the mechanism with the small rib on one side of the slot and that the mechanism is properly seated on the board. Then, screw the captive nuts in place.

WARNING! Do not overtighten the captive nuts. Doing so could damage your motherboard. Tighten captive nuts to no more than 6±1 inch/pound.

Lock holes

Captive nut

Captive nut

20

ASUS P2B-L/P2B-S/P2B-LS User’s Manual