NETWORK .VII

Layout/Installation

VII. NETWORK INTERFACE

LED Connectors

Link Indicator: This connects to an LED to monitor 10Base-T and 100Base-TX con- nections. The LED lights to indicate a successful network connection, and remains steady if the connection is stable. If this indicator is off, the cable connection between the hub and the computer may be faulty or the driver configuration may be faulty.

Activity Indicator: This connects to an LED to monitor network activity. The LED lights when there are network packets sent or received through the RJ45 port. The rate of flashing is proportional to the amount of network traffic. If this is off, the computer is not sending or receiving network data.

Speed Indicator: This connects to an LED to monitor connection speed. The LED lights (On) when connection is made to a 100Base-TX host. If Off, the network connection is operating at 10Mbps.

Network Cable Connection

Twisted Pair Ethernet (TPE) - Connect a single network cable to the RJ45 connector. For 100BASE-TX, your network cable must be category 5 (not category 3), twisted- pair wiring with RJ45 connectors. If you plan on running the interface at 100 Mbps, it must be connected to a 100BASE-TX hub (not a 100BASE-T4 hub). For 10BASE-T, use category 3, 4, or 5 twisted-pair wiring.

Twisted-Pair Cable

The cable used to connect the Ethernet card to a host (generally a Hub) is called a straight-through twisted-pair. The end connectors are called RJ45 connectors, which are not compatible with the standard RJ11 telephone connectors. The illustration shows a connection between a typical Hub and this motherboard’s network interface.

RJ45

Straight-Through Cable

 

 

 

 

 

 

Motherboard

 

 

 

 

 

 

 

 

 

 

 

Hub

Card

 

 

 

 

 

 

 

 

 

 

1 IRD+

1 OTD+

 

 

 

 

 

 

 

 

 

 

2 IRD-

2 OTD-

HUB

 

 

 

 

 

 

 

 

 

3 OTD+

3 IRD+

Uplink

1

2

3

4

5

6

7

8

 

 

12345678

12345678

12345678

12345678

12345678

12345678

12345678

12345678

 

6 OTD-

6 IRD-

 

 

 

 

 

 

 

 

 

 

RJ45 Connector

Pin 1

Output Transmit Data +

Pin 2

Output Transmit Data -

Pin 3

Input Receive Data +

Pin 6

Input Receive Data -

Pins 4,5,7,8

(Reserved)

HUB RJ45 Connector

12345678

64

ASUS P2B-L/P2B-S/P2B-LS User’s Manual