Asus P2B-L, P2B-LS, P2B-S Chipset Features Setup, Details of Chipset Features Setup, NOTE:, Chipset, SDRAM CAS Latency, SDRAM RAS to CAS Delay, SDRAM RAS Precharge Time

Chipset	.IV
Features	BIOS

IV. BIOS SOFTWARE

Chipset Features Setup

The “Chipset Features Setup” option controls the configuration of the board’s chipset.

NOTE: SETUP Defaults are noted in parenthesis next to each function heading.

Details of Chipset Features Setup

SDRAM Configuration (By SPD)

This sets the optimal timings of settings for items 2–5, depending on the memory modules that you are using. Default setting is By SPD, which configures items 2–5 by reading the contents in the SPD (Serial Presence Detect) device. This 8-pin serial EEPROM device stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks.

SDRAM CAS Latency

This controls the latency between SDRAM read command and the time that the data actually becomes available. Leave on default setting.

SDRAM RAS to CAS Delay

This controls the latency between SDRAM active command and the read/write command. Leave on default setting.

SDRAM RAS Precharge Time

46 ASUS P2B-L/P2B-S/P2B-LS User’s Manual