Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus P2B-VM Color, Settings, Save As, Defaults, Center dialog boxes, Enable task bar icon, Show settings icon on task bar

1 96

Download 96 pages, 2.11 Mb

Driver Video .A

Settings Display

A. Video Driver

Color

This allows you to adjust the Gamma level for your monitor and color levels for Red, Green, and Blue. You can save your settings by clicking Save As and typing in a file name. This allows you to recall previously saved settings. Click Defaults to restore all settings to their defaults.

Settings

This allows you to adjust the Color palette, Font size, and Display area. Choose Center dialog boxes to keep messages visible, Enable task bar icon for easy access to the ATI configuration menus, and Show settings icon on task bar for quick resolution changes.

64	ASUS P2B-VM User’s Manual

Contents

Page Product Name: ASUS P2B-VM Manual Revision: 1.04 E295 Release Date: ASUSTeK COMPUTER INC Marketing Technical Support ASUS COMPUTER INTERNATIONAL ASUS COMPUTER GmbH Page Details of PNP and PCI Setup ASUS Support CD Main Menu A. Video Driver B. Other Video Drivers C. ATI Player Federal Communications Commission Statement •This device may not cause harmful interference, and •Re-orientor relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help How this manual is organized Introduction: Features: Installation: IV. BIOS Software: Features of the ASUS P2B-VMMotherboard Specifications: Multi-Speed: Multi-Cache: PC100 Memory Support: Special Features: Enhanced ACPI: Anti-Boot (Anti-Boot Vi- rus BIOS) and file viruses through the bundled Intelligent Features: Auto Fan Off: even in sleep mode and system noise Parts of the ASUS P2B-VMMotherboard ASUS P2B-VMMotherboard Layout Layout Motherboard Intel 440BX AGPset Jumpers Expansion Slots Connectors Layout Contents Jumpers Installation Steps Before using your computer, you must complete the following steps: 1.Set Jumpers on the Motherboard 2.Install System Memory Modules 3.Install the Central Processing Unit (CPU) 3.Real Time Clock (RTC) RAM (CLRTC) RTC RAM CLRTC Clear CMOS 4.Keyboard Power (Wake) Up (KB_WAK) 5.CPU Bus Frequency Selector (FS0, FS1, FS2, FS3, FS4) 6.CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) Internal External CPU Bus Frequency 2.System Memory (DIMM) 3.3Volt SDRAM Configuration Install memory in any combination as follows: General DIMM Notes DIMM Memory Installation Universal Retention Mechanism Heatsinks Installing the Processor 2.Attach the Heatsink SECC with Pentium® SECC2 with Pentium® II/SEPPwith Celeron™ 3.Insert the SECC/SECC2/SEPP SECC with Pentium II only: 4.Secure the SECC/SECC2/SEPP Recommended Heatsinks for Slot 1 Processors Expansion Card Installation Procedure Assigning IRQs for Expansion Cards Assigning DMA Channels for ISA Cards 5.External Connectors 1.PS/2 Mouse Connector (6-pinFemale) 2.PS/2 Keyboard Connector (6-pinFemale) 3.Parallel Port Connector (25-pinFemale) NOTE: Serial printers must be connected to the serial port 4.Serial Port COM1 Connector (9-pinMale) Audio Port Connectors (Three 1/8” Female) Line Out Line In Mic Joystick/Midi Connector 9.Primary / Secondary IDE connectors (Two 40-1pinIDE) 10.Floppy Disk Drive Connector (34-1pinFLOPPY) 11.IrDA-Compliantinfrared module connector (5-pinIR) 12.Wake-On-LANConnector (3-pinWOL_CON) WAKE On LAN Power Up Con- trol BIOS SOFT- WARE do not place jumper caps over these pins 14.ATX Power Supply Connector (20-pinblock ATXPWR) 15.SB-Link™Connector (6-1pin SBLINK) Stereo Audio In Connector The CD_IN connector can be used to receive stereo audio input from an internal CD-ROM 17.Message LED Lead (2-pinMLED) 18.Keyboard Lock Switch Lead (2-pinKEYLOCK) 19.System Management Interrupt Lead (2-pinSMI) 20.Speaker Connector (4-pinSPEAKER) This 4-pinconnector connects to the case-mountedspeaker 25.Serial Port COM 2 (10-1pin COM2) 26.ATI Multimedia Channel AMC (40-3pin AMC) Power Connection Procedures 1.After all connections are made, close the system case cover 2.Be sure that all switches are off (in some systems, marked with ) 5.You may then turn on your devices in the following order: a.Your monitor Main Menu 2. Update BIOS Including Boot Block and ESCD Flash Memory Writer IV. BIOS Managing and Updating Your Motherboard’s BIOS 6. BIOS Setup BIOS Setup Load Defaults Standard CMOS Setup Details of Standard CMOS Setup: Time (Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59) Hard Disks For IDE hard disk drive setup, you can: •Use theAuto setting for detection during bootup Auto detection of hard disks on bootup Auto NOTE: SETUP Defaults are noted in parenthesis next to each function heading Drive A (None) Floppy 3 Mode Support (Disabled) BIOS Features Setup Details of BIOS Features Setup BIOS BIOS CPU Level 1 Cache / CPU Level 2 Cache (Enabled) CPU Level 2 Cache ECC Check (Disabled) This function controls the ECC check capability in the CPU level 2 cache BIOS Update (Enabled) HDD S.M.A.R.T. capability (Disabled) PS/2 Mouse Function Control (Auto) OS/2 Onboard Memory > 64M (Disabled) PCI/VGA Palette Snoop (Disabled) Video ROM BIOS Shadow (Enabled) Chipset Features Setup Details of Chipset Features Setup Graphics Aperture Size (64MB) Video Memory Cache Mode (UC) USWC PCI 2.1 Support (Enabled) Memory Hole At 15M–16M(Disabled) Onboard Serial Port 1 (3F8H/IRQ4) Settings are and for the onboard serial connector Onboard Serial Port 2 (2F8H/IRQ3) Power Management Setup Details of Power Management Setup Video Off Method (DPMS OFF) DPMS OFF DPMS Reduce ON Blank Screen V/H SYNC+Blank, DPMS Standby PWR Up On Modem Act (Enabled) AC PWR Loss Restart (Disabled) Disabled Power Up By Keyboard (Disabled) Wake On LAN (Enabled) PNP and PCI Setup Details of PNP and PCI Setup DMA x Used By ISA (No/ICU) ISA MEM Block BASE (No/ICU) SYMBIOS SCSI BIOS (Auto) Auto USB IRQ (Enabled) Load BIOS Defaults Load Setup Defaults Supervisor Password and User Password IDE HDD Auto Detection Save & Exit Setup Exit Without Saving CD Support Contents ASUS Support CD Main Menu NOTE: The CD version and contents are constantly modified without notice LDCM Local Setup: Adobe Acrobat Reader: •BusMaster: (Windows 95 only) Installs the Intel BusMaster IDE drivers A. Video Driver B. Other Video Drivers C. ATI Player D. Audio Driver Support CD E. Audio Software F. Software Wavetable G. DMI Utility Operating Systems Windows Video .A Install Video Driver and Utility (Windows 95/98) To install the video driver and utility for Windows 95/98 My Computer Setup.exe Click Install Video Driver and Utility Adjustment Menu Panning Menu Color Settings Installing Video Drivers for Windows NT Drivers Video Other .B OS/2 IBM Video Driver Installation for IBM OS/2 The ATI OS/2 video driver is to be used for the English version of OS/2 only To run the INSTALL program 1.Start OS/2 3.Double-clickthe OS/2 System folder To copy the driver files 1.Select Drivers Installation from the Main Menu 2.Select IBM OS/2 from the list of applications 3.Select Install for the correct version of OS/2 5.After the files have been copied, press any key System Information (optional) System Information Quick Setup (optional) Selecting Your Monitor Type: Factory Default/Apple.../IBM.../MIT.../NEC VESA-Std.../Generic.../ReadVDIF.../Custom VDIF Files (optional) Procedure: 1.Start the INSTALL program 2.Select Quick Setup and press <Enter 3.Insert into a floppy drive the disk containing the VDIF file Advanced Setup (optional) Factory Defaults The device can be reset to factory defaults by pressing <Shift>+<F7 Saving Your Configuration Diagnostics System Lockup Troubleshooting Codes Error Desired resolution is disabled and displayed in gray Menu item is disabled and displayed in gray Adapter not detected Any FIFO test error Windows 95 enhanced display driver Windows 95 property page problems ATI Video Player Notes Other Problems & Actions ATI Player ATI Player and control panel (Win3.1x and Win95) The Task Control Panel Under win31 environment Under Win95 environment Playing Audio CDs (Only in window 95) Playing Media Files Playing Interactive Discs (Video CD 2.0) (This page was intentionally left blank) For Windows First Time Installation For Windows NT Page Audio Rack Installation Install Audio Utilities Audio Rack Introduction The AudioRack32 has six main parts: AudioRack32 The Command Center Controls The Command Center Display The Miniature Mode Controls The Audio Mixer Controls The Digital Audio Player Controls The Digital Audio Player Display The MIDI Player Controls The MIDI Player Display The Compact Disk Player Controls The Audio Recorder Controls The Audio Recorder Display Disable Eject Button on the CD Player Using AudioRack CD Player as Default CD Player Configuring Playback Mixer Installation Wavetable .F Install Software Wavetable (Windows 95/98) Click Install Software Wave Table Select Install ESS Software Wavetable and click Next Select Yes, I want to restart my computer now and then click Finish to restart your computer and complete setup Introducing the ASUS DMI Configuration Utility Starting the ASUS DMI Configuration Utility Using the ASUS DMI Configuration Utility Notes Save MIFD Load MIFD Load BIOS Defaults Using DMI Utility G. DMI Utility