III. INSTALLATION

Installing the Processor

.III

1.Unlock the URM’s Folding Support Arms: The folding support arms of the URM are locked when shipped.

The URM is now ready for the installation of your processor.2. Attach the Heatsink

Unlocked Folding Support Arms

INSTALLATION CPU

NOTE: Follow carefully the heatsink attachment instructions included with your heatsink or processor. The following steps are provided only as a general guide and may not reflect those for your heatsink.

SECC with Pentium® II

Place the SECC face down on a flat surface and lay the heat sink flush on the back (metal side) of the SECC. Check the orientation of the heatsink against the illustration below. The thicker fin must be orientated toward the

SECC2withPentium® II/SEPPwith Celeron™

Insert the heatsink clip through the holes at the SECC2/SEPP’s back, making sure that the bottom of the clip plate sits against the processors’s back. Remove the tab from the thermal grease, which is located on the bottom of the heatsink)

20

ASUS P2B User’s Manual