III.INSTALLATION

13.Wake-on-LAN Connector (3-pin WOL_CON)

The WOL_CON connector powers up the system when a wakeup packet or signal is received from the network through the ASUS PCI-L101 LAN card (see section VII. ASUS LAN Card).

IMPORTANT: This feature requires that the WAKE On LAN Power Up Control is set to Enabled (see “Power Management Setup” under IV. BIOS SOFTWARE) and that your system has an ATX power supply with at least 720mA +5V standby power.

+5VSB

(No Connection)

P2B Wake on LAN Connector

Ground

14.SB-Link™ Connector (6-1 pin SBLINK)

Using Intel’s PC-PCI DMA and serialized IRQ protocols found in this motherboard’s AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digital) or other PCI audio cards, enabling users to play Real-mode DOS games and multimedia applications. SB-Link acts as a bridge between the motherboard and the PCI audio card by providing the DMA and IRQ signals present in the ISA bus but not available on the PCI bus.

1 2

PC/PCI Grant Sideband Signal DGND PC/PCI Request Sideband Signal

DGND Serial IRQ

5 6

SBLINK

NOTE: Pin 3 is removed to ensure the correct orientation of the cable on it.

P2B SB-Link™ Connector

15.SMBus Connector (5-1 pin SMB)

This connector allows you to connect SMBus devices. SMBus devices commu- nicate by means of the SMBus with an SMBus host and/or other SMBus de- vices. The SMBus or System Management Bus is a specific implementation of an I2C bus, which is a multi-master bus, that is, multiple chips can be connected to the same bus and each one can act as a master by initiating data transfer.

1

SMBCLK

Ground

SMBDATA

+5V

P2B SMBus Connector

INSTALLATION

Connectors

III.

 

 

 

ASUS P2B User’s Manual

31