III. INSTALLATION

Jumper Settings

1.Real Time Clock (RTC) RAM (CLRTC)

The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug your AC power, (2) Short the two points (Labeled: CLRTC), (3) Turn on your computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.

Short small solder points to clear CMOS

CLRTC

2.VGA Interrupt Selection (VIRQ)

These jumpers allow you to set the VGA interrupt method. The default disables the chipset’s interrupt routing. Some video capture cards may require that inter- rupts be assigned by the onboard chipset.

VIRQ VIRQ

Disable (Default) Enable

INSTALLATION

Jumpers

III.

 

 

 

ASUS P2L97A User’s Manual

13