Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus P3V133 7.3 Glossary, Bus, Boot, 33MHz, 66MHz, 133MHz, 266MHz, 1 GB/s, 133MB/s, 528MB/s, Bus Speed, AUTOEXEC.BAT, Bus Frequency, Bus Master IDE, Bit (Binary Digit)

1 96

Download 96 pages, 3.67 Mb

7. APPENDIX

7.3 Glossary

AGP (Accelerated Graphics Port)

An interface specification that enables high-performance 3D graphics on mainstream PCs. AGP offers a higher throughput than PCI by providing the graphics controller with direct access to system memory.

	Bus	Bus Frequency	Bus Speed
	PCI	33MHz	133MB/s		APPENDIX

	AGP 1X	66MHz	200-300MB/s
	AGP 1X	66MHz	200-300MB/s

	AGP 2X	133MHz	528MB/s

	AGP 4X	266MHz	1 GB/s		7.

AUTOEXEC.BAT

AUTOEXEC.BAT is a special-purpose file that is automatically executed by DOS whenever the computer is turned ON or restarted. This file contains important commands that help configure the system to work with certain software and devices. Windows 95 and later has its own startup files and may not use or may ignore parts of the AUTOEXEC.BAT file.

BIOS (Basic Input/Output System)

BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’s read-only memory. BIOS parameters can be configured by the user through the BIOS Setup program. The BIOS can be updated using the provided utility to copy a new BIOS file into the EEPROM.

Bit (Binary Digit)

Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1.

Boot

Boot means to start the computer operating system by loading it into system memory. When the manual instructs you to “boot” your system (or computer), it means to turn ON your computer. “Reboot” means to restart your computer. When using Windows 95 or later, selecting “Restart” from “Start Shut Down...” will reboot your computer.

Bus Master IDE

PIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for mechanical events. Bus master IDE transfers data to/from the memory without interrupting the CPU. Bus master IDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.

ASUS P3V133User’s Manual

91

Contents

Page Product Name: ASUS P3V133 Manual Revision: 1.02 E507 Release Date: ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) 1. INTRODUCTION 2. FEATURES 3. HARDWARE SETUP 3.6.1 Quick CPU Installation Procedure 3.6.3 Installing the Universal Retention Mechanism 4.3.1 Primary & Secondary Master/Slave 5. SOFTWARE SETUP 5.1.1 Windows 98 First Time Installation 6. SOFTWARE REFERENCE 7. APPENDIX Federal Communications Commission Statement •This device may not cause harmful interference, and •Re-orientor relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help 1.1How This Manual Is Organized 1.2 Item Checklist 2.1The ASUS P3V133 2.1.1 Specifications Super Multi-I/O: Enhanced ACPI & Anti-Boot Virus Protection: 2.1.2Special Features 2.1.3 Performance Features 2.1.4Intelligence 2.2P3V133 Motherboard Components P3V133 Motherboard Components Locations 3.1P3V133 Motherboard Layout 3.2Layout Contents 3.3Hardware Setup Steps 3.4 Motherboard Settings Jumpers 2.I/O Voltage Setting (VIO) Test Normal 3.Voltage Regulator Output Setting (VCORE) This jumper sets the core voltage supplied to the microprocessor Motherboard H/W SETUP 4.CPU Bus Frequency Selection (FS0, FS1, FS2, FS3) 5.CPU:PCI Bus Frequency Multiple Selection (MS0, MS1) 6.CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) Internal External CPU Bus Frequency SETUPH/W 3.5System Memory (DIMM) DIMM Memory Installation Procedures: Page 3.6Central Processing Unit (CPU) 3.6.1 Quick CPU Installation Procedure 3.6.2Attaching the Heatsink 3.6.3Installing the Universal Retention Mechanism 3.6.4Installing the Processor 3.6.5Removing the Processor 3.6.7ASUS Smart Thermal Solutions ASUS S-P2FAN To Use the ASUS S-P2FAN ASUS P2T-Cable To Use the ASUS P2T-Cable 3.6.8Precautions 3.7Expansion Cards Expansion Card Installation Procedure Assigning IRQs for Expansion Cards Interrupt Request Table Assigning DMA Channels for ISA Cards Accelerated Graphics Port (AGP) 3.8External Connectors 3.Parallel Port Connector (25-pinfemale) Chipset Features Setup NOTE 4.Serial Port COM1 and COM2 Connectors (Two 9-pinmale) Connectors 6.Primary / Secondary IDE Connectors (Two 40-1pinIDE) 7.Floppy Disk Drive Connector (34-1pinFLOPPY) 8.IDE Device Activity LED (2-pinIDELED) 9.Wake-On-RingConnector (2-pinWOR) NOTES: do not place jumper caps over these pins 11.Wake-On-LANConnector (3-pinWOL_CON) Power Up Control Enabled Power Management Setup 12.IrDA-CompliantInfrared Module Connector (5-pinIR) 13.SMBus Connector (5-1pin SMB) 14.ATX Power Supply Connector (20-pinATXPWR) 15.Chassis Intrusion Alarm Lead (optional) (4-1pin CHASIS) 7. APPENDIX 16.System Power LED Lead (3-1pin PWR.LED) 17.Keyboard Lock Switch Lead (2-pinKEYLOCK) 19.System Message LED Lead (2-pinMSG.LED) 20.System Management Interrupt Lead (2-pinSMI) 21.ATX Power Switch / Soft-OffSwitch Lead (2-pinPWR.SW) 3.9Starting Up the First Time Award BIOS Beep Codes 4.1Managing and Updating Your BIOS 4.1.1 Upon First Use of the Computer System 4.1.2Updating BIOS Procedures (only when necessary) Page 4.2BIOS Setup Program 4.2.1BIOS Menu Bar 4.2.2 Legend Bar General Help Saving Changes and Exiting the Setup Program Scroll Bar Sub-Menu 4.3Main Menu 4.3.1Primary & Secondary Master/Slave [User Type HDD] Translation Method [LBA] Cylinders Translation Method Head Sector CHS Capacity Maximum LBA Capacity Multi-SectorTransfers [Maximum] Other options for “Type:” are: [CD-ROM] - for IDE CD-ROMdrives [LS-120] [ZIP-100] [MO] Forgot the password Halt On [All Errors] Installed Memory [XXX MB] BIOSSETUP 4.4Advanced Menu USB Legacy Support [Auto] OS/2 Onboard Memory > 64M [Disabled] 4.4.1Chip Configuration CPU-DRAM Back-BackTransaction [Disabled] Configuration options: [Enabled] [Disabled] Delayed Transaction [Enabled] PCI to DRAM Prefetch [Disabled] Configuration options: [Disabled] [Enabled] 4.4.2I/O Device Configuration Parallel Port [378H/IRQ7] Parallel Port Mode ECP DMA Select Parallel Port Mode [ECP+EPP] ECP DMA Select [3] 4.4.3PCI Configuration PCI/PNP ISA IRQ Resource Exclusion PCI/PNP ISA UMB Resource Exclusion 4.4.4 Shadow Configuration 4.5Power Menu Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] Hard Disk Timeout [Disabled] Auto Suspend Timeout [Off] PWR Button Behavior [On/Off] 4.5.1Power Up Control Wake Up By Keyboard [Disabled] Resume On Time [Off] 4.5.2Hardware Monitor 4.6Boot Menu Boot Sequence Menu Boot Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] 4.7Exit Menu Exit Saving Changes Discard Changes Save Changes 5.1Operating Systems 5.1.1 Windows 98 First Time Installation 5.2P3V Series Motherboard Support CD 5.2.1 Installation Menu 5.3ASUS PC Probe Setup 5.4Adobe Acrobat Reader 5.5Install VIA 4 in 1 Driver 5.6Install PC-Cillin 5.7Uninstalling Programs Page 6.1ASUS PC Probe 6.1.1 Starting ASUS PC Probe 6.1.2Using ASUS PC Probe Settings CPU Cooling System Setup History Information Hard Drives Memory Device Summary DMI Explorer Utility Execute Program 6.1.3ASUS PC Probe Task Bar Icon Page 7.1ASUS S370-133CPU Card 7.1.1 Using the ASUS S370-133 7.1.2Setting up the ASUS S370-133 7.1.3 ASUS S370-133Jumper Settings 7.2ASUS PCI-L101Fast Ethernet Card 7.2.1 Features 7.2.2 Software Driver Support 7.2.3 Questions and Answers 7.3 Glossary Glossary Byte (Binary Term) COM Port CPU (Central Processing Unit) Device Driver PCI Bus (Peripheral Component Interconnect Local Bus) Peripherals POST (Power On Self Test) PS/2 Port RAID (Redundant Array of Independent Disks) USB (Universal Serial Bus)