Manuals / Brands / Computer Equipment / Computer Hardware / Asus / Computer Equipment / Computer Hardware

Asus P3V4X 3.6.5Removing the Processor, 3.6.6 Recommended Heatsinks for Slot 1 Processors, SECC:, CAUTION, H/WSETUP, SECC2/SEPP:, SECC Heatsink & Fan

1 96

Download 96 pages, 3.62 Mb

3.HARDWARE SETUP

3.6.5Removing the Processor

SECC: Push the SECC’s two locks inward to disengage the latch feature and firmly lift the SECC assembly out of the URM.

SECC2/SEPP

Push lock inward

CPU fan cable to	CPU fan cable to
fan connector	fan connector

SECC2/SEPP:

URM (A): Unlock the URM by pushing the two locks down and then pull the SECC2/SEPP assembly out.

URM (B): Place one hand on the heatsink and your other thumb on the top of one of the URMs. Push the URM away from the assembly with your thumb while you rotate the processor out of the slot 1 connector with the other.

CAUTION! You may wear gloves to protect your hands from the sharp edges when removing SECC2/SEPP processors.

H/WSETUP	CPU
3.

3.6.6 Recommended Heatsinks for Slot 1 Processors

The recommended heatsinks for the Slot 1 processors are those with three-pin fans that can be connected to the motherboard’s CPU fan connector. These heatsinks dissipate heat more efficiently and with an optional hardware monitor, they can monitor the fan’s RPM and use the alert function with the Intel LANDesk Client Manager (LDCM) or the ASUS PC Probe software.

SECC Heatsink & Fan

SECC2 Heatsink & Fan

NOTE: The SEPP heatsink and fan (for Intel Celeron processors) is similar to the SECC2 heatsink and fan except that the clamping design is different.

ASUS P3V4X User’s Manual

27

Contents

Page Product Name: ASUS P3V4X Manual Revision: 1.02 E525 Release Date: March ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) 1. INTRODUCTION 2. FEATURES 3. HARDWARE SETUP 3.6.1 Quick CPU Installation Procedure 3.6.3 Installing the Universal Retention Mechanism 5. SOFTWARE SETUP 5.1.1 Windows 98 First Time Installation Install ADOBE AcroBat Reader Vx.xx 6. SOFTWARE REFERENCE 7. APPENDIX Federal Communications Commission Statement •This device may not cause harmful interference, and •Re-orientor relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help 1.1How This Manual Is Organized 1.2 Item Checklist 2.1The ASUS P3V4X 2.1.1 Specifications Wake-On-Ring Connector: PC Health Monitoring: Super Multi-I/O: 2.1.2Special Features 2.1.3 Performance Features 2.1.4Intelligence 2.2P3V4X Motherboard Components P3V4X Motherboard Component Locations 3.1P3V4X Motherboard Layout 3.2Layout Contents 3.3Hardware Setup Procedure 3.4Motherboard Settings 1.JumperFree™ Mode (JEN) 4.4 Advanced Menu NOTE: In JumperFree™ mode, all dip switches (DSW) must be set to OFF Setting JEN 3.CPU Bus Frequency Selection (U12–Switches7, 8, 9, 10) NOTE: In JumperFree mode, all dip switches must be set to OFF 4.CPU Core:BUS Frequency Multiple (U12–Switches1, 2, 3, 4) Internal External CPU Bus Frequency Adjusting CPU Settings Manually 3.5System Memory (DIMM) Page Page 3.6Central Processing Unit (CPU) 3.6.1 Quick CPU Installation Procedure 3.6.2Attaching the Heatsink 3.6.3Installing the Universal Retention Mechanism 3.6.4Installing the Processor 3.6.5Removing the Processor 3.6.6 Recommended Heatsinks for Slot 1 Processors 3.6.7Precautions 3.7Expansion Cards 3.7.1 Expansion Card Installation Procedure 3.7.2 Assigning IRQs for Expansion Cards Standard Interrupt Assignments 3.7.3 Assigning DMA Channels for ISA Cards 3.7.4 Accelerated Graphics Port (AGP) 3.8External Connectors 3.Parallel Port Connector (25-pinfemale) Onboard Parallel Port 4.4.2 I/O Device Configuration NOTE 4.Serial Port COM1 and COM2 Connectors (Two 9-pinmale) 6.Primary / Secondary IDE Connectors (Two 40-1pinIDE) NOTE: The hole near the blue connector on the UltraDMA/66 cable is intentional IMPORTANT: UltraDMA/66 IDE devices must use a 40-pin 80-conductorIDE cable 7.Floppy Disk Drive Connector (34-1pinFLOPPY) 8.IDE Device Activity LED (2-pinIDELED) 9.Wake-On-RingConnector (2-pinWOR) PWR UP On External Modem Act 4.5.1 Power Up Control NOTES: do not place jumper caps over these pins 11.Wake-On-LANConnector (3-pinWOL_CON) 12.IrDA-CompliantInfrared Module Connector (5-pinIR) 13.SMBus Connector (5-1pin SMB) 14.Power Supply Thermal Sensor Connector (2-pinblock JTPWR) 15.ATX Power Supply Connector (20-pinATXPWR) 16.Chassis Intrusion Alarm Lead (optional) (4-1pin CHASSIS) 17.System Power LED Lead (3-1pin PWR.LED) 18.Keyboard Lock Switch Lead (2-pinKEYLOCK) 20.System Message LED Lead (2-pinMSG.LED) 21.System Management Interrupt Lead (2-pinSMI) 22.ATX Power Switch / Soft-OffSwitch Lead (2-pinPWR.SW) 3.9Power Connection Procedures Award BIOS Beep Codes 4. BIOS SETUP 4.1Managing and Updating Your BIOS 4.1.1 Upon First Use of the Computer System 4.1.2Updating BIOS Procedures (only when necessary) Page Page 4.2BIOS Setup Program 4.2.1BIOS Menu Bar 4.2.2 Legend Bar General Help Saving Changes and Exiting the Setup Program Scroll Bar Sub-Menu 4.3Main Menu 4.3.1Primary & Secondary Master/Slave [User Type HDD] Translation Method [LBA] Cylinders Translation Method Head Sector CHS Capacity Maximum LBA Capacity Multi-SectorTransfers [Maximum] 4.3.2 Keyboard Features Supervisor Password [Disabled], User Password [Disabled] A Note about Passwords Forgot the password BIOSSETUP MainMenu 4.4Advanced Menu CPU Vcore Vcore ranges CPU Level 1 Cache, CPU Level 2 Cache [Enabled] CPU Level 2 Cache ECC Check [Disabled] Processor Serial Number [Disabled] 4.4.1Chip Configuration SDRAM Active to Precharge Time Read Around Write [Enabled] CPU-DRAM Back-BackTransaction [Enabled] Configuration options: [Enabled] [Disabled] Delayed Transaction [Disabled] Video Memory Cache Mode [UC] Onboard PCI IDE Enable [Both] Memory Hole At 15M-16M[Disabled] 4.4.2I/O Device Configuration Onboard Parallel Port [378H/IRQ7] Parallel Port Mode ECP DMA Select Parallel Port Mode [ECP+EPP] ECP DMA Select [3] 4.4.3PCI Configuration PCI/PNP ISA IRQ Resource Exclusion PCI/PNP ISA DMA Resource Exclusion PCI/PNP ISA UMB Resource Exclusion 4.4.4 Shadow Configuration 4.5Power Menu Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] Suspend Mode [Disabled] PWR Button < 4 Secs [Soft off] 4.5.1Power Up Control Pwr Up On PS2 KB/Mouse [Disabled] Wake Up By Keyboard [Space Bar] Wake On PS2 KB/PS2 Mouse/CIR Automatic Power Up [Disabled] 4.5.2Hardware Monitor 4.6Boot Menu Boot Sequence Plug & Play O/S [No] Reset Configuration Data [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] 4.7Exit Menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Page 5.1Operating Systems 5.1.1 Windows 98 First Time Installation 5.2P3V Series Motherboard Support CD 5.2.1 Installation Menu 5.3Install ASUS PC Probe 5.4Install PC-Cillin98 5.5Install ADOBE AcroBat Reader 5.6VIA 4 in 1 Driver 5.7Uninstalling Programs Page 6.1ASUS PC Probe 6.1.1 Starting ASUS PC Probe 6.1.2Using ASUS PC Probe Settings CPU Cooling System Setup History Information Hard Drives 6.1.3 ASUS PC Probe Task Bar Icon 7.1S370 Series CPU Cards 7.1.1Using the ASUS S370 Series CPU Cards 7.1.2Setting up the ASUS S370 Series CPU Cards 7.2ASUS PCI-L101Fast Ethernet Card 7.2.1 Features 7.2.2 Software Driver Support 7.2.3 Questions and Answers 7.3 Glossary COM Port CPU (Central Processing Unit) Device Driver DOS (Disk Operating System) Hardware POST (Power On Self Test) PS/2 Port RAID (Redundant Array of Independent Disks) RAM (Random Access Memory) ROM (Read Only Memory)