7.Front panel audio connector (10-1 pin FP_AUDIO1)

This is an interface for the front panel cable that allows convenient connection and control of audio devices.

Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins

LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps only when you are connecting the front panel audio cable.

P4P800S-X

AGND

+5VA

BLINE OUT R

BLINE OUT L

FP_AUDIO

 

 

 

MIC2

MICPWR

Line out R NC

Line out L

P4P800S-X Front Panel Audio Connector

8. Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

CHASSIS

GND

Chassis Signal (Default)

P4P800S-X

+5VSB_MB

P4P800S-X Chassis Alarm Lead

ASUS P4P800S-X motherboard

1-21