11.System panel connector (10-1 pin PANEL1)This connector accommodates several system front panel functions.

Power LED

+5 V

PLED

PANEL

 

HD LED+

HD LED-

P4P800S-X

IDELED

Speaker

Connector

+5V

Ground Ground Speaker

PWRBIN Ground

Reset Ground

 

Reset SW

ATX Power Switch*

P4P800S-X System Panel Connector * Requires an ATX power supply.

•System Power LED Lead (Green 3-pin PLED)

This 3-pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•System Warning Speaker Lead (Orange 4-pin SPEAKER)

This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings.

•Reset Switch Lead (Blue 2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the system power.

•ATX Power Switch/Soft-off Switch Lead (Light Green 2-pin PWRSW)

This connector connects a switch that controls the system power. Pressing the power switch turns the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the power switch while in the ON mode for more than 4 seconds turns the system OFF.

•Hard Disk Activity Lead (Red 2-pin IDE_LED)

This connector supplies power to the hard disk activity LED. The read or write activities of any device connected to the primary or secondary IDE connector cause this LED to light up.

The System Panel connector is color-coded for easy and foolproof connection. Take note of the specific connector colors as described.

ASUS P4P800S-X motherboard

1-23