2.USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). Both jumpers are set to pins 1-2 (+5V) by default because not all computers have the appropriate power supply to support this feature.

The USBPW12 and USBPW34 jumpers are for the rear USB ports. The USBPW56 and USBPW78 jumpers are for the internal USB header that you can connect to the front USB ports.

1. This feature requires a power supply that can provide at least 1A on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system would not power up.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

3.The rear panel USB ports (Ports 1 to 4) do not support device wake-up from S4 sleep mode.

 

USBPW12

 

 

USBPW34

 

1

2

2

3

+5V

+5VSB

(Default)

 

 

 

USBPW56

 

 

USBPW78

 

1

2

2

3

P4S800D-X

 

 

 

+5V

+5VSB

P4S800D-X USB device wake up (Default)

ASUS P4S800D-X motherboard

1-13