Manuals / Brands / Portable Media / Clock Radio / Asus / Portable Media / Clock Radio

Asus P4S800D-X Boot the system, 1.Boot the system, ASUS P4S800D-Xmotherboard, Place the support CD in the, To recover the BIOS from the support CD:

1 64

Download 64 pages, 1.65 Mb

To recover the BIOS from the support CD:

1.Boot the system.

2.When a corrupted BIOS is detected, the following screen message appears.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

If there is no floppy disk found in the drive, the system automatically checks the CD-ROM.

3.Place the support CD in the CD-ROM. The support CD contains the original BIOS for this motherboard.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Floppy not found!

Checking for CD-ROM...

CD-ROM found.

Reading file “P4S800DX.ROM”. Completed.

Start flashing...

DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot failure!

4. When the BIOS update process is complete, reboot the system.

The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS file.

ASUS P4S800D-X motherboard

2-7

Contents

Page E1753 First Edition September Chapter 1: Product introduction Chapter 2: BIOS information 2.1.1 Creating a bootable floppy disk 2.1.2 Using AFUDOS to copy the current BIOS 2.1.3 Using AFUDOS to update the BIOS Chapter 3: Software support Electrical safety Operation safety Conventions used in this guide Where to find more information Page Page Page Thank you for buying the ASUS® P4S800D-Xmotherboard Check your P4S800D-Xpackage for the following items ASUS P4S800D-Xmotherboard 2 x Serial ATA cable Bag of extra jumper caps User Guide SiS® HyperStreaming Architecture Serial ATA solution with RAID 0, RAID 1 support CrashFree BIOS AGP 8X support 8 USB 2.0 ports C.P.R. (CPU Parameter Recall) ASUS EZ Flash BIOS ASUS Instant Music Lite Onboard LED 1.5.1Motherboard layout 1.5.2Placement direction 1.5.3 Screw holes 1.6.1Overview 1.6.2Installing the CPU 1.7.1DIMM sockets location 1.7.2Memory configurations 1.7.3Installing a DIMM 1.8.1Standard interrupt assignments 1.8.2IRQ assignments for this motherboard 1.8.3PCI slots 1.8.4AGP slot 1.Clear RTC RAM (CLRTC1) To erase the RTC RAM: 1.Turn OFF the computer and unplug the power cord 3.Plug the power cord and turn ON the computer Hold down the <Del> key during the boot process and enter BIOS setup to 2.USB device wake-up (3-pinUSBPW12, USBPW34, USBPW56, USBPW78) 1.10.1 Rear panel connectors 1.10.2 Internal connectors 3.ATX power connectors (20-pinATXPWR1, 4-pinATX12V1) 4.Internal audio connectors (4-pinCD1, AUX1) 5.CPU, power and chassis fan connectors (3-pinCPU_FAN1, PWR_FAN1, CHA_FAN1) 6.USB header (10-1pin USB56, USB78) 7.Front panel audio connector (10-1pin FP_AUDIO1) Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins 8.Chassis intrusion connector (4-1pin CHASSIS1) 9.GAME/MIDI connector (16-1pin GAME1) 10. Serial ATA connectors (7-pinSATA1, SATA2) 11.System panel connector (10-1pin F_PANEL1) This connector accommodates several system front panel functions •System Power LED Lead (Green 3-1pin PLED) •System Warning Speaker Lead (Orange 4-pinSPEAKER) •ATX Power Switch / Soft-OffSwitch Lead (Yellow 2-pinPWRSW) Page 2.1.1Creating a bootable floppy disk 2.1.2Using AFUDOS to copy the current BIOS 2.1.3Using AFUDOS to update the BIOS 2.1.4Using ASUS EZ Flash to update the BIOS 2.1.5Recovering the BIOS with CrashFree BIOS To recover the BIOS from the support CD: 2.When a corrupted BIOS is detected, the following screen message appears Place the support CD in the Page 2.2.1BIOS menu screen 2.2.2Menu bar 2.2.3Navigation keys 2.2.4Menu items 2.2.5Sub-menuitems 2.2.6Configuration fields 2.2.7Pop-upwindow 2.2.8Scroll bar 2.3.1System Time [xx:xx:xxxx] 2.3.2System Date [Day xx/xx/xxxx] 2.3.3Legacy Diskette A [1.44M, 3.5 in.] 2.3.4Primary and Secondary IDE Master/Slave Type [Auto] LBA/Large Mode [Auto] Block (Multi-sectorTransfer) [Auto] PIO Mode [Auto] 2.3.5OnChip SATA Controller [Enabled] 2.3.6System Information 2.4.1JumperFree Configuration 2.4.2CPU Configuration 2.4.3Chipset Graphic Adapter Priority [PCI] Graphics Aperture Size [64MB] Advanced HyperStreaming Engine [Disabled] Performance Mode [Auto] 128 Bit Access Mode [Auto] Ch0 MA 1T/2T Select [Auto] Ch1 MA 1T/2T Select [Auto] DRAM CAS# Latency [By SPD] DRAM Precharge Delay [Auto] 2.4.4Onboard Devices Configuration EPP Version [1.9] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] 2.4.5PCI PnP 2.4.6USB Configuration 2.4.7Instant Music Configuration 2.5.1Suspend Mode [Auto] 2.5.2Repost Video on S3 Resume [No] 2.5.3ACPI 2.0 Support [No] 2.5.4ACPI APIC Support [Enabled] 2.5.5APM Configuration 2.5.6Hardware Monitor 2.6.1Boot Device Priority 2.6.2Hard Disk Drives 2.6.3Removable Drives 2.6.4Boot Settings Configuration Full Screen Logo [Enabled] Add On ROM Display Mode [Force BIOS] Bootup Num-Lock[On] Allows you to select the power-onstate for the NumLock Configuration options: [Off] [On] 2.6.5Security Change User Password To set a User Password: 1.Select the Change User Password item and press Enter The User Password item now shows Installed Clear User Password Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Page 3.2.1Running the support CD 3.2.2Drivers menu 3.2.3Utilities menu 3.2.4ASUS Contact Information To enable ASUS Instant Music Lite: Turn on the system and enter BIOS by pressing the Delete In the Advanced Configuration To use ASUS Instant Music Lite: Instant Music function keys (Set 1) Instant Music function keys (Set 2) 4.Press Esc to turn ON Instant Music Lite 5.Place an audio CD on the drive