5.CPU, power and chassis fan connectors (3-pin CPU_FAN1, PWR_FAN1, CHA_FAN1)

The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

PWR_FAN1

Rotation

+12V

GND

CPU_FAN1

P4S800D-X

P4S800D-X Fan connectors

Rotation

+12V

GND

CHA_FAN1

GND +12V Rotation

6.USB header (10-1 pin USB56, USB78)

If the USB ports on the rear panel are inadequate, a USB header is available for additional USB ports. Connect the USB cable of the USB 2.0 module to this header. You may install the USB module in the chassis front panel. The module has two USB 2.0 ports for connecting next generation USB peripherals such as high resolution cameras, scanners, and printers.

P4S800D-X

USB56

1

P4S800D-X USB 2.0 connectors

USB+5V

USB P6-

USB P6+

GND NC

USB+5V

USB P5-

USB P5+

GND

NC

GND

USB_P8+

USB_P8-

USB+5V

USB78

1

USB+5V-P7+GND

P7__

USBUSB

NEVER connect a 1394 cable to the connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

ASUS P4S800D-X motherboard

1-17