Asus P4T-E 3.3Hardware Setup Procedure, 2.Install memory modules, 4.Install Expansion Cards, 1.Check motherboard settings, 6.Configure the BIOS parameter settings

Started Getting

SETUP H/W .3

3.HARDWARE SETUP

3.3Hardware Setup Procedure

IMPORTANT: Due to Pentium 4 CPU’s power consumption requirement, an ATX12V power supply is recommended for this motherboard. For typical system configurations, an ATX12V power supply that can supply at least 230W and at least 8.5A on the +12V lead is required. For heavily-loaded configurations, an ATX12V power supply that can supply at least 300W is required.

Complete the following steps before using your computer:1.Check motherboard settings2.Install memory modules3.Install the Central Processing Unit (CPU)4.Install Expansion Cards5.Connect ribbon cables, panel wires, and power supply cables6.Configure the BIOS parameter settings

WARNING! Make sure that you unplug your power supply when adding or removing system components. Failure to do so may cause severe damage to your motherboard, peripherals, and/or components.

16 ASUS P4T-E User’s Manual