Asus P4T-E IMPORTANT:, Power Supply Connectors, ASUS P4T-EUser’s Manual, IMPORTANT: Make sure that your ATX 12V power supply (minimum recom

3.HARDWARE SETUP

20)Power Supply Connectors (20-pin block ATXPWR) (4-pin ATX12V) (6 pin block AUXPWR (optional)

These connectors supply ATX 12V power. Each power supply plug inserts in one orientation only. Push down firmly and make sure the pins are aligned.

IMPORTANT: Make sure that your ATX 12V power supply (minimum recom-

mended wattage: 230 watts; 300W for a fully-configured system) can supply at least 20 amperes on the +5-volt lead and at least 720mA on the +5-volt standby lead (+5VSB). Your system may become unstable/unreliable and may experience difficulty in powering up if your power supply is inadequate. For Wake- On-LAN support, your ATX power supply (minimum recommended wattage: 230watts) must supply at least 720mA +5VSB.

			AUXPWR
		Pin 1								Key
						OMC		+3V	+5V	Pin 1
					ATXPWR					+12.0VDC	+5.0VDC
										+5VSB	+5.0VDC
										PWR_OK	-5.0VDC
										COM	COM
		ATX12V								+5.0VDC	COM
										COM	COM
	P4T-E			Pin 1						+5.0VDC	PS_ON#
										COM	COM
		COM					COM
		+12V DC					+12V DC			+3.3VDC	-12.0VDC
										+3.3VDC	+3.3VDC
P4T-E ATX &
Auxiliary Power Connectors

.3 SETUPH/W

Connectors

ASUS P4T-E User’s Manual 41