3.HARDWARE SETUP

4)USB Device Wake-up (USBPWR)

The jumpers are set to +5V as the default to allow wake up from the S1 sleep state (CPU stopped; RAM refreshed; system running in low power mode) using the connected USB devices. Set the jumpers to +5VSB to allow wake up from S3 sleep state (no power to CPU; RAM in slow refresh; power supply in re- duced power mode).

The default setting for the three jumpers is 2-3 to select +5V (because not all computers have the appropriate power supply to support the other mode).

NOTES:

1.This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system does not power up.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in sleep mode.

 

USBPWR

2

3

2

1

 

+5VSB+5V (Default)

P4T-E

P4T-E USB Device Wake Up

.3 SETUPH/W

Motherboard Settings

ASUS P4T-E User’s Manual

21