2. HARDWARE SETUP

Interrupt Request Table for this Motherboard

 

INT-A INT-B INT-C

INT-D

INT-E INT-F

INT-G INT-H

PCI slot 1

—

—

—

—

—

shared

—

—

PCI slot 2

—

—

—

—

—

—

used

—

 

 

 

 

 

 

 

 

 

PCI slot 3

—

—

—

—

—

—

—

shared

AGP slot

used

—

—

—

—

—

—

—

 

 

 

 

 

 

 

 

 

USB HC0

—

—

—

used

—

—

—

—

USB HC1

—

—

—

—

—

—

—

shared

 

 

 

 

 

 

 

 

 

SMB

—

shared

—

—

—

—

—

—

AC’97

—

shared

—

—

—

—

—

—

 

 

 

 

 

 

 

 

 

LAN (8139C)

—

—

—

—

—

shared

—

—

IMPORTANT: If using PCI cards on shared slots, make sure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Conflicts will arise between the two PCI groups that will make the system unstable or cards inoperable.

2.4.3 Accelerated Graphics Port (AGP) Pro Slot

This motherboard provides an accelerated graphics port (AGP) pro slot to support a new generation of AGP graphics cards with ultra-high memory bandwidth.

P4T-M

P4T-M Accelerated Graphics Port (AGP)

CAUTION! The AGP Pro slot is shipped with a warning label over the 20-pin bay. DO NOT remove this label and the safety tab underneath it if you will be using an AGP card without a retention notch. Removing may cause the

card to shift and may cause damage to your card, slot, and moth- erboard. Remove ONLY when you will be using an AGP Pro card. Use a rigid tip, such as a pen tip, to dislodge and remove the tab from the bay.

Removing the tab

ASUS P4T-M Quick Setup Manual

13