4)Wake-On-LAN Connector (3-pin WOL)

This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

Ground

P4T-M

PME +5 Volt Standby

P4T-M Wake-On-LAN Connector

5)USB Headers (10-1 pin USB2)

If the USB Ports on the back panels are inadequate, a USB header is available for two additional USB ports. Connect the 10-1 pin ribbon cable from the pro- vided 2-port USB connector set to the midboard 10-1 pin USB header and mount the USB connector set to an open slot on your chassis.

10

5

USB2

6

1: USB Power

6: USB Power

 

2: USBP2–

7: USBP3–

1

3: USBP2+

8: USBP3+

4: GND

9: GND

5: NC

P4T-M

P4T-M USB Headers

16

ASUS P4T-M Quick Setup Manual