Asus P4T-M 2.3Central Processing Unit (CPU)

2.HARDWARE SETUP

2.3Central Processing Unit (CPU)

The motherboard provides a ZIF Socket for the supported CPUs. The CPU that came with the motherboard should have a fan attached to it to prevent overheating. If this is not the case, then purchase a fan before you turn on your system.

Socket 423 Pentium 4

P4T-M

Gold Arrow

P4T-M Socket 423

Before you start, you should check to see that you have the following items: (NOTE: Motherboard layout is not identical to the example.)

Rubber Pad

Metal Baseboard

2 Metal heatsink retaining clips

4 Copper captive nuts

4 Washers

4 Pan Head screws

2 Heatsink support bases

ASUS P4T-M Quick Setup Manual

Contents

ASUS P4T-MQuick Setup Manual 1.1P4T-MMotherboard Layout 1.2Layout Contents 2.1Getting Started 2.2System Memory 2.2.1Installing Memory 2.3Central Processing Unit (CPU) 2.3.1CPU Installation Step 1: Install the Baseboard Step 2: Install the CPU Step 3: Install the Heatsink Support Base Step 4: Install the Heatsink Step 5: Install the Heatsink Retaining Clips 2.4Expansion Cards 2.4.1 Expansion Card Installation Procedure 2.4.2 Assigning IRQs for Expansion Cards Standard Interrupt Assignments Interrupt Request Table for this Motherboard 2.4.3 Accelerated Graphics Port (AGP) Pro Slot 2.5Onboard Connectors 2)Floppy Disk Drive Connector (34-1pinFLOPPY) do not place jumper caps over these pins 4)Wake-On-LANConnector (3-pinWOL) Wake On LAN or PCI Modem 4.5.1 Power Up Control 5)USB Headers (10-1pin USB2) 6)Internal Audio Connectors (4-pinVIDEO, CD_IN, AUX) 7)Front-PanelConnectors (12-pinAFPANEL) 8) Power Supply Connectors (20-pinblock ATXPWR) (6-pinAUXPWR) (4-pinATX12V) IMPORTANT: Make sure that your ATX 12V power supply (minimum recom ATX12V ATXPWR P4T-MATX & The following is for items 15–21 P4T-MSystem Panel Connectors 9)System Power LED Lead (3-1pin PWRLED) 10)Keyboard Lock Switch Lead (2-pinKEYLOCK) 11)System Warning Speaker Connector (4-pinSPEAKER)