Asus P4T-M ATX12V, ATXPWR, P4T-MATX &, Auxiliary Power Connectors, ASUS P4T-MQuick Setup Manual, IMPORTANT: Make sure that your ATX 12V power supply (minimum recom

8) Power Supply Connectors (20-pin block ATXPWR) (6-pin AUXPWR) (4-pin ATX12V)

These connectors connect to an ATX 12V power supply. Each plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. An auxiliary power supply may be needed depending on your system configuration.

IMPORTANT: Make sure that your ATX 12V power supply (minimum recom-

mended wattage: 230 watts; 300W for a fully-configured system) can supply at least 20 amperes on the +5-volt lead and at least 720mA on the +5-volt standby lead (+5VSB). Your system may become unstable/unreliable and may experience difficulty in powering up if your power supply is inadequate. For Wake- On-LAN support, your ATX power supply (minimum recommended wattage: 230watts) must supply at least 720mA +5VSB.

	Pin 1
COM		COM
+12V DC		+12V DC

		ATX12V
	ATXPWR
	Pin 1
	+3.3VDC		+3.3VDC
	+3.3VDC		-12VDC
	COM		COM
	+5VDC		PS_ON#
	COM		COM
	+5VDC		COM
P4T-M	COM		COM
	PWR_OK		-5VDC
	+5VSB		+5VDC
	+12VDC		+5VDC

P4T-M ATX &Auxiliary Power Connectors

18 ASUS P4T-M Quick Setup Manual