Asus P4T533-C 2.5.2 Installing Memory

2.5.2 Installing Memory

The memory module (RIMM) will fit in only one orientation.

Do not touch the memory module’s connectors. Handle the module only by the edges.

P4T533-C

P4T533-C 184-Pin RIMM Sockets

RIMM Sockets

RIMM with Heat Spreader

C-RIMM

1.Make sure that the notch keys in the module are aligned with the small ribs inside the RIMM sockets.

MOUNTING NOTCH RDRAM (with heat spreader) NOTCH KEYS

CONNECTORS

(TOP VIEW)

EJECTOR RIBS (inside socket)

2.With the ejectors in the open position (as shown), push down gently but firmly on the memory module until it snaps into place. The guides on the socket’s ejectors should go through the two mounting notches on the module and the ejectors should close. If necessary, push the ejectors inward to secure the module in place.

No hardware or BIOS setup is required after adding or removing memory.

ASUS P4T533-C motherboard user guide 17