20. ASUS iPanel / Infrared Connector (24-1 pin AFPANEL)

This connector supports an optional ASUS iPanel, an easy to access drive bay with front I/O ports, status LEDs, and space reserved for a hard disk drive. Alternatively, if not using an ASUS iPanel, connect an optional wireless transmitting and receiving infrared module to the SIR connector for wireless transmitting/remote control functions through an external infrared module.

P4T533-C

+5 V

IRRX GND IRTX SMBDATA +3VSB SMBCLK NC NC

NC NC

AFPANEL

NCGNDNCCIRRX+5VSBCHASSIS#EXTSMI#+5V-PCIRST#BATTNC

MLED

P4T533-C iPanel Connector

21.Line-out Selector Jumpers (2 x 2 pin FP_LO_SWL, FP_LO_SWR) By default, these jumpers are shorted (jumpers on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices such as speakers or a headphone. If you connect the Intel Front Panel audio cable to the IPANEL connector, (see above) then remove the caps from these two jumpers to permit automatic switching of audio signals between the rear panel Line Out jack and the Intel audio cable.

FP_LO_SWL FP_LO_SWR

 

BLOL

BLOR

P4T533-C

FLOL

FLOR

P4T533-C Internal Line Out Connectors

ASUS P4T533-C motherboard user guide

39