Intel® Application Accelerator RAID Option ROM Utility

The Intel® Application Accelerator RAID Option ROM utility allows you to create RAID 0 and RAID 1 set(s) from SATA hard disk drives that are connected to the SATA connectors supported by the motherboard Southbridge chip.

To enter the Intel® Application Accelerator RAID Option ROM utility:

1.Turn on the system after installing all the SATA hard disk drives.

2.During POST, press <Ctrl+I> to display the utility main menu.

Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211

Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.

[ MAIN MENU ]

1.Create RAID Volume

2.Delete RAID Volume

3.Reset Disks to Non-RAID

4.Exit

 

 

 

[ DISK/VOLUME INFORMATION ]

 

 

RAID

Volumes:

 

 

 

 

 

None

defined.

 

 

 

 

 

Non-RAID Disks:

 

 

 

 

 

Port

Drive Model

Serial #

Size

Type/Status (Vol ID)

 

0

ST380013AS

xxxxxxxx

74.5GB

Non-RAID Disk

 

1

ST380013AS

xxxxxxxx

74.5GB

Non-RAID Disk

 

 

 

[ ]-Select

[ESC] Exit

 

[Enter]-Select Menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen.

At the bottom of the screen are the navigation keys. These keys allow you to move through the menus and select the menu options.

 

 

 

 

[ ]-Change

[TAB]-Next

[ESC] Previous Menu

[Enter]-Select

 

 

 

 

5 - 18

Chapter 5: Software support