Creating a RAID 1 set (mirrored)

To create a RAID 1 set:

1.From the utility main menu, select [1. Create RAID Volume], then press <Enter>. The following screen appears.

Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211

Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.

[ CREATE ARRAY MENU ]

Name: RAID_Volume1

RAID Level: RAID1(Mirror)

Disks: Select Disk

Strip Size: 128KB

Capacity: 149.0GB

[ HELP ]

Enter a string between 1 and 16 characters in length taht can be used to uniquely identify the RAID volume. This name is case sensitive and can not contain special characters.

[ ]-Change

[TAB]-Next

[ESC] Previous Menu

[Enter]-Select

 

 

 

 

2.Enter a name for the RAID 1 set, then press <Enter>.

3.Use the up or down arrow keys to move to the RAID Level item.

4.When the RAID Level item is highlighted, press the up or down arrow key to select RAID 1, then press <Enter>. The Create Volume prompt appears.

5.On the Create Volume prompt, press <Enter> to create the array.

6.Press <Y> when this query window appears.

WARNING: ALL DATA ON SELECTED DISK WILL BE LOST.

Are you sure you want to create this volume (Y/N)

7.Select [4. Exit], then press <Enter> to exit the RAID configuration utility. Press <Y> when the utility displays a confirmation window.

5 - 20

Chapter 5: Software support