1.10.2Internal connectors

1.Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

FLOPPY

P5B-VM

PIN 1

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.

P5B-VM Floppy Disk Drive Connector

Digital Audio connector (4-1 pin SPDIF_OUT)

This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module.

P5B-VM

GND SPDIFOUT

+5V

SPDIF_OUT

P5B-VM Digital Audio Connector

The S/PDIF out module is purchased separately.

1-30

Chapter 1: Product introduction