2.4.5Onboard Devices Configuration
HD Audio Controller | [Enabled] |
Onboard 1394 Controller | [Enabled] |
Onboard PCIE GbE LAN | [Enabled] |
LAN Option ROM | [Disabled] |
JMicron SATA/PATA Controller | [Enabled] |
JMicron Controller Mode | [BASIC] |
Serial Port1 Address | [3F8/IRQ4] |
Parallel Port Address | [378] |
Parallel Port Mode | [ECP] |
ECP Mode DMA Channel | [DMA3] |
Parallel Port IRQ | [IRQ7] |
HD Audio Controller [Enabled]
Allows you to enable or disable the High Definition Audio controller. Configuration options: [Disabled] [Enabled]
Front Panel Support Type [HD Audio]
Allows you to set the Front Panel Support Type.
Configuration options: [AC97] [HD Audio]
Onboard 1394 Controller [Enabled]
Allows you to enable or disable the onboard 1394 controller.
Configuration options: [Disabled] [Enabled]
Onboard PCIE Gb LAN [Enabled]
Allows you to enable or disable the onboard PCIE Gigabit LAN controller. Configuration options: [Disabled] [Enabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item appears only when the Onboard LAN item is set to Enabled. Configuration options: [Disabled] [Enabled]
JMicron SATA/PATA Controller [Enabled]
Allows you to enable or disable the JMicron SATA/PATA controller.
Configuration options: [Disabled] [Enabled]
JMicron Controller Mode [BASIC]
Allows you to set the JMicron Controller Mode.
Configuration options: [RAID] [BASIC] [AHCI]
Must load the JMB363 driver when create RAID sets, even if all the drivers of the RAID sets are used as data drivers.
Chapter 2: BIOS setup |