Installing a DIMM

1.Locate the DIMM sockets in the motherboard.

2.Unlock a DIMM socket by pressing the retaining clips outward.

3.Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.

4.Push the DIMM to the socket until the retaining clips snap inward.

CAUTION:

•Unplug the power supply before adding or removing DIMMs. Failure to do so may cause damage to the motherboard and/or components.

•A DDR DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM.

Installing an expansion card

1. Remove the metal cover opposite 2. Remove the metal bracket lock. the slot that you intend to use.

1

2

3.Insert the card connector to the slot, then press the card firmly until it fits in place.

4.Replace the metal bracket lock.

3

4



Installation manual