2-322-32
2-322-32
2-32 Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
2.6.12.6.1
2.6.12.6.1
2.6.1 Boot Device PriorityBoot Device Priority
Boot Device PriorityBoot Device Priority
Boot Device Priority
1st ~ xxth Boot Device [1st Floppy Drive]1st ~ xxth Boot Device [1st Floppy Drive]
1st ~ xxth Boot Device [1st Floppy Drive]1st ~ xxth Boot Device [1st Floppy Drive]
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [PM-ST330620A]
3rd Boot Device [PS-ASUS CD-S360]
2.6.32.6.3
2.6.32.6.3
2.6.3 Boot Settings ConfigurationBoot Settings Configuration
Boot Settings ConfigurationBoot Settings Configuration
Boot Settings Configuration
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]Quick Boot [Enabled]
Quick Boot [Enabled]Quick Boot [Enabled]
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
2.6.22.6.2
2.6.22.6.2
2.6.2 Hard Disk DrivesHard Disk Drives
Hard Disk DrivesHard Disk Drives
Hard Disk Drives
1st ~ xxth Drive [XXXXXX]1st ~ xxth Drive [XXXXXX]
1st ~ xxth Drive [XXXXXX]1st ~ xxth Drive [XXXXXX]
1st ~ xxth Drive [XXXXXX]
These items specify the boot device sequence of available disk drives. The
number of disk drives that appear on the screen depends on the number of
drives installed in the system. Configuration options: [XXXXXXX] [Disabled]
Hard Disk Drives
1st Drive [XXXXXXXXX]
2nd Drive [XXXXXXXXX]