Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard!

You can attach a FireWire/1394 cable to this connector if your chassis suppots the front panel IEEE1394 port. Connect the 1394 cable to ASUS Q-Connector (1394, red) first, and then install the Q-Connector (1394) to the 1394 connector onboard.

6.CPU, chassis and power fan connectors(4-pin CPU_FAN, 3-pin CHA_FAN1-4, 3-pin PWR_FAN)

The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

P5K DELUXE

CPU_FAN PWR_FAN

CHA_FAN2

 

PWR IN PWM

Rotation

 

 

 

 

 

Rotation

 

 

 

 

 

 

 

 

 

 

 

+12V

 

 

 

 

+12V

 

 

 

 

 

 

 

GND CPU FAN CPU FAN CPU FAN

GND

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHA_FAN1

CHA_FAN3

CHA_FAN4

GND +12V Rotation

P5K DELUXE Fan connectors

GND +12V Rotation

Rotation +12V GND

•Only the CPU-FAN and CHA-FAN 1-4 connectors support the ASUS Q-Fan feature.

•If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labled CHA_FAN1 or CHA_FAN2 for better themal environment.

2-30

Chapter 2: Hardware information