Asus P5k 4.3.7AHCI Configuration, Intel Robson Technology [Disabled], Hard Disk Write Protect [Disabled], SATA Detect Time Out (Sec) [35], ACHI Port1~6 [XXXX]

Intel Robson Technology [Disabled]

Allows you to enable or disable Intel Robson Technology.

Configuration option: [Disabled] [Enabled]

The Intel Robson Technology appears only when you set the item Configure SATA as to [AHCI].

Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if the device is accessed through BIOS. Configuration option: [Disabled] [Enabled]

SATA Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices.

Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

4.3.7AHCI Configuration

This menu is the section for AHCI configuration. It appears only when you set the item Configure SATA as from the sub-menu of SATA Configuration to [AHCI].

AHCI Settings

AHCI Port1 [Not Detected]

AHCI Port2 [Not Detected]

AHCI Port3 [Not Detected]

AHCI Port4 [Not Detected]

AHCI Port5 [Not Detected]

AHCI Port6 [Not Detected]

ACHI Port1~6 [XXXX]

Displays the status of auto-detection of SATA devices.

While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detection of IDE devices.

AHCI Port1
Device	:Not Detected		Select the type of
			devices connected to
SATA Port1		[Auto]	the system.

SATA Port1 [Auto]

Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed]

4-14 Chapter 4: BIOS setup