Asus P5LD2-VM DH 9 . ATX power connectors, (24-pinEATXPWR and 4-pinATX12V)

9 . ATX power connectors(24-pin EATXPWR and 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Do not forget to connect the 4-pin ATX +12 V power plug;

otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details.

				EATXPWR
DH	ATX12V		+3	Volts	Ground
-VM
			+12	Volts	+5 Volts
P5LD2
	GND	+12V DC +12 Volts			+5 Volts
			+5V Standby		+5 Volts
			Power OK		-5 Volts
	GND	+12V DC	Ground		Ground
			+5	Volts	Ground
			Ground		Ground
			+5 Volts		PSON#
			Ground		Ground
P5LD2-VM DH ATX power connectors			+3	Volts	-12 Volts
			+3 Volts		+3 Volts

1 - 32 Chapter 1: Product introduction