Asus P5LD2 4.6.4Security, Installed, Not Installed, Change Supervisor Password, Change Supervisor Password, Change Supervisor Password, Interrupt 19 Capture [Disabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

4.6.4Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

Security Settings		<Enter> to change
Supervisor Password	: Not Installed	password.
		<Enter> again to
User Password	: Not Installed
		disabled password.
Change Supervisor Password
Boot Sector Virus Protection		[Disabled]

	Select Screen
	Select Item
+-	Change Option
F1	General Help
F10	Save and Exit
ESC	Exit

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item, then press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message ÒPassword InstalledÓ appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message ÒPassword UninstalledÓ appears.

If you forget your BIOS password, you can clear clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section Ò2.6 JumpersÓ for information on how to erase the RTC RAM.

4 - 40 Chapter 4: BIOS setup