3.When prompted, press the <SpaceBar> to select Yes from the Consistency Check dialog box, then press <Enter>. You may also press <F10> to check the drive consistency.
A progress bar appears on screen.
4.While checking the disk consistency, press <Esc> to display the following options.
• Stop | - Stops the consistency check. The utility stores |
| the percentage of disk checked. When you restart |
| checking, it continues from the last percentage |
| completed rather than from zero percent. |
• Continue - Continues the consistency check.
• Abort | - Aborts the consistency check. When you restart |
| checking, it continues from zero percent. |
5.When checking is complete, press any key to continue.
Chapter 5: RAID configuration |