5.4.1 Confi guri ng the SCSI controll er

You need to configure the SCSI controller before creating a RAID set. After selecting the SCSI channel to use, the utility prompts you to select from the available options. Use the arrow keys to select Configure/View SCSI Controller Settings, then press <Enter>.

5.4.2 Enabli ng the H ostRAI D controll er

To enable the Adaptec HostRAID controller:

1.Use the arrow keys to select the HostRAID item in the Configuration section.

2.Press <Enter> to set the item to Enabled.

3.Press <Esc> to exit.

4.When the utility prompts you to save the changes, select Yes, then press <Enter>.

5-32

Chapter 5: RAID configuration